Windows xp sound card driver problems

In the sections below, I will discuss some of the more useful tabs that you might encounter for a device.

Just keep in mind that not every device will have every tab. If the device is failing, the General tab may sometimes present you with some brief information regarding the nature of the problem. Keep in mind that the Device Status is usually accurate, but may sometimes be misleading. Beneath the Device Status is a Troubleshoot button. I recommend using the Troubleshooting wizard as a last resort. The Properties tab The next tab is the Properties tab. Typically the Properties tab will only exist under the listing for your physical sound card.

The Properties tab contains a list of all of the virtual devices that Windows sees on the physical hardware. As you select each device, you can click the Properties button to display a properties sheet that allows you to enable or disable the virtual device. The Driver tab The Driver tab is the place where you can control which driver is assigned to the multimedia device.

This tab contains four buttons that you can use to manipulate the driver. Most of the time when you suspect a sound card problem, one of the first things that you should do is to update the driver. This is especially true if you upgraded the computer from another operating system. When you upgrade a system, Windows tries to replace your current driver with one of its own. I had been using a 3COM wireless network card with Windows on my laptop for quite some time.

Updating your system with newer drivers is almost always a good idea and tends to fix a wide range of problems. The Resources tab The Resources tab is designed to show you exactly what system resources the device is using. If a conflict does exist, some devices allow you to deselect the Use Automatic Settings check box. You may then select the conflicting resource and use the Change Settings button to assign the device a different set of resources. If you do choose to assign resources manually, I recommend using the System Information tool to gain a better picture of which resources are presently in use.

When the System Information tool opens, look at the various nodes beneath Hardware Resources in the System Summary tree. Was it working before or have you upgraded recently? Did you try running the free scan on drivers.

This setup took too long to install and then as soon as I did stuffs and all suddenly it all went blank and the computer restarted itself. Can you suggest What my Case is???

Please help me. This is real serious. If dad finds out that my Audio drive has gone corrupt he will fracture my head!!!! I do not have the airplane mode on. Using Windows 8. It says that there is no sound card found but in the s config the window audio is running? I nid ur help. Thank you so much…Troubleshooting procedure really worked for my computer..

Have you tried the free drivers scan use download links in the article above — this will show you if the problem is with your Audio Drivers. Hi Venkanna — was your audio working ok before? Have you recently made hardware or software changes? You can run our drivers scan using the software download link above. Error 0xcc:The endpoint is a duplicate. Hi, accidentally deleted my realtek audio drive and re-installed it but even though computer shows that no audio device found.

I am using windows xp please help me to solve my problem. Hi Riya — are you sure it was the correct Driver you installed? Try the free scan in article above and the report should show the exact realtek driver you need so you can check against this.

The one installed by windows is not working while the one installed for the same for windows 7 and xp 32 bit it is working. Hi sir i install new win xp. I downloaded the driver above but it refused to install in my windows XP, then i copied it in another system, it ran a little and wrote error. Please help. So there was a waste of 30 USD. Hi Daniel — when you say failed do you mean it did not find the Drivers? Can you give me a bit more detail so I can look into it? Trying to copy a file to my 1trb storage device, but it became slow and trying to cancel this process, power went off.

On restoration of power, the storage device can not be recognised by any system again. I tried to update my driver and installation was successful but the port is not working.

Code 28 Access is denied. To find a driver for this device, click Update Driver. I tried, checking the driver details, updating the driver, enable, uninstall.

Nothing worked out. Kindly help me with a solution. I have a windows 8 tablet. USB port was working fine till i did an update for the windows 8. I tried using a micro usb converter for the micro usb port and it works. However the full sized usb 2.

Able to help? Tried the F8 way,system recover way, and control panel way. States safe mode has been turne off. I must reboot in normal mode to enable windows to work. Possibly Malware, or maybe a virus. Any help or suggestions would be of good use right now?