How to program comcast box to show time

How far off? Is it X1 or a legacy? X1 itself keeps horrible time and it is not unusual for the on-screen time to be minutes or more behind.

Well, the "obvious" answer is, it didn't adjust for Daylight Saving Time. I would say, "See if there is a setting somewhere to handle this," but I don't think settings available through Xfinity's menus affect the box itself. A lot of X1 boxes don't have visible clocks. Do you know a specific model number of yor cable box? Maybe there's a manual somewhere online that can solve the problem.

I know how frustrating it can be to walk past that digital clock and see the incorrect time. There are times that it was the only clock in my home that we relied on. The following steps should help you to adjust the time on the front display on your cable box.

The code will get from the code booklet that you have got when you bought the Xfinity remote, or you can use the code lookup tool from the official Xfinity website. You can find the proper code from my website too. I will put the link here later. So, how to program such kind of Xfinity remote control. After entering the keys, the LED light will blink twice if the code you have entered is correct, and if incorrect, the light will blink a long time.

If you have entered the wrong code, then enter another code from the code set to program the remote properly. When you have not got the remote programmed properly, reset the remote by removing the batteries from the remote, and then insert the batteries.

Then start the process again carefully to program the Xfinity remote control. So the first step will be finding the proper Xfinity remote codes before programming the remote control. When you have got the positive signal from the remote that the remote has programmed successfully, please check all of the keys or buttons on the Xfinity remote control.

Wait for the remote light to change from red to green. Follow the instructions by entering the three-digit, on-screen pairing code. Use Page Down to jump backward instead. Learn how to delete recordings.

If the buttons on your Voice Remote XR15 are still unresponsive, you may need to perform a factory reset. To perform a factory reset: Press and hold the A triangle and D diamond buttons at the same time for three seconds until the status light changes from red to green.

Press The LED at the top of the remote will change from red to green. Enter